jump to navigation


Posted by sailingnightwatch in Durbeck, FL, Florida, ICW, Pensacola, Restoration, Sailing, Sailing the ICW.

The antenna wire goes through an opening in the cap rail. The tuner should be as close to the antenna as possible because the wire from the top of the tuner to the antenna is in fact part of the antenna. Not a big deal except that as with everything else about this boat, the hull deck joint is thick, real thick. You can not drill from the inside because the hull/deck joint is up in a small gunnel area. Plus the space is full of bolts that hold the hull/deck joint together. Therefore, one must determent where to drill from above the cap rail. Did I mention the screw holding on the cap rail. You have heard of measure twice, cut once, this was measure 4-5 times, mash teeth and drill once. Success.



No comments yet — be the first.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: